Introduction to Crusher wheel forgings, wheel specifications, model parameters

Crusher wheel forgingsIs a workpiece or blank obtained by forging and deforming a metal blank.。The following is to introduce the Crusher wheel forgings:

1、Brief introduction of Crusher wheel forgings

Crusher wheel forgingsis a workpiece or blank obtained by forging a metal blank. In the forging process, pressure is applied to the metal blank to cause plastic deformation, thus changing its mechanical properties. Crusher wheel forgings can be divided into cold forging, warm forging and hot forging according to the temperature of blank during processing.，features include individualized design, Exquisite appearance, Strong corrosion resistance, Excellent heat dissipation performance and Lightweight design，In the process of forging, the metal streamline is retained, which makes the mechanical properties of forgings better than those of castings of the same material. In addition, the forging process can also eliminate the defects of as-cast porosity and optimize the microstructure, thus improving the service life and reliability of forgings.、In the process of forging, the metal streamline is retained, which makes the mechanical properties of forgings better than those of castings of the same material. In addition, the forging process can also eliminate the defects of as-cast porosity and optimize the microstructure, thus improving the service life and reliability of forgings.、This processing method can optimize the microstructure of metal, eliminate defects such as as as-cast porosity, improve the density and strength of materials, and make the Crusher wheel forgings have excellent mechanical properties and wear resistance.、It has good comprehensive mechanical properties and wear resistance, and can bear large loads and impacts.、In the process of forging, the metal streamline is retained, which makes the mechanical properties of forgings better than those of castings of the same material. In addition, the forging process can also eliminate the defects of as-cast porosity and optimize the microstructure, thus improving the service life and reliability of forgings.，is a Crusher wheel forgings，It has the functions of Adapt to different environments and conditions, Industrial application, Vehicle movement, Adapt to different environments and conditions and load capacity。

Crusher wheel forgings

2、Crusher wheel forgings use

Crusher wheel forgingsIt is mostly used in Reduce vibration and shock, Provides stability and handling., Reduce vibration and shock, load capacity, Industrial application, Vehicle movement and so on。

Crusher wheel forgings

3、Crusher wheel forgings advantage

The advantages of Crusher wheel forgings are as follows:

1. high tenacity

In the process of forging, the metal blank undergoes plastic deformation under pressure, thus improving the toughness of the material. This makes the Crusher wheel forgings not easy to break when it bears impact, and enhances its durability and reliability.

2. Good physical properties

During the forging process, the Crusher wheel forgings formed a fine particle structure and improved its physical properties, such as toughness and fatigue strength, which made the Crusher wheel forgings show excellent performance in practical application.

3. Good anti-fatigue performance

After forging, the micro defects in the Crusher wheel forgings are eliminated, and the structure is more uniform and dense, thus improving the fatigue resistance. This is especially important for equipment that needs to run for a long time and bear periodic loads.

4. Strong corrosion resistance

After proper surface treatment (such as spraying anticorrosive paint, etc.), the corrosion resistance of the Crusher wheel forgings can be significantly improved. This is especially important for equipment operating in harsh environment, which can prolong the service life of Crusher wheel forgingss and reduce maintenance costs.

5. High strength

In the forging process, the plastic deformation improves the density and uniformity of the material, so it has a high strength-to-weight ratio and can resist long-term friction and wear.

Crusher wheel forgings

4、Crusher wheel forgings display

Haide Crusher wheel forgings manufacturing factory。

Crusher wheel forgings

Note: All the pictures in this article were taken by Jianing manufacturer.。

5、Crusher wheel forgings characteristics

Crusher wheel forgingsthe main features are Superior mechanical properties, Good physical properties, High strength, individualized design and Superior mechanical properties，The price is relatively low.。

Crusher wheel forgings

6、Structural characteristics of Crusher wheel forgings

The Crusher wheel forgings structure is introduced as follows:

1. wheel flange

Located at the outer edge of the Crusher wheel forgings, it is the part where the Crusher wheel forgings contacts the road surface or installs tires.

2. spoke

The part connecting the hub and the rim plays the role of supporting and transmitting load.

3. hub

Located in the center of the Crusher wheel forgings, it is the key part of the connection between the Crusher wheel forgings and the axle.

4. wheel flange

The shape and size of the rim have an important influence on the rolling performance, wear resistance and service life of the Crusher wheel forgings. In some designs, the rim may also include a tread part for contacting with the track to ensure the stable operation of the Crusher wheel forgings on the track.

5. spoke

There are various structural forms of spokes, such as straight spoke, oblique spoke, spoke plate, etc. The specific form depends on the purpose, load characteristics and lightweight requirements of the Crusher wheel forgings.

Crusher wheel forgings

Crusher wheel forgingsthe product looks atmospheric.，is a Crusher wheel forgings part made by forging process.，the advantage is This processing method can optimize the microstructure of metal, eliminate defects such as as as-cast porosity, improve the density and strength of materials, and make the Crusher wheel forgings have excellent mechanical properties and wear resistance.、It has good comprehensive mechanical properties and wear resistance, and can bear large loads and impacts.、In the process of forging, the metal streamline is retained, which makes the mechanical properties of forgings better than those of castings of the same material. In addition, the forging process can also eliminate the defects of as-cast porosity and optimize the microstructure, thus improving the service life and reliability of forgings.、This processing method can optimize the microstructure of metal, eliminate defects such as as as-cast porosity, improve the density and strength of materials, and make the Crusher wheel forgings have excellent mechanical properties and wear resistance.、It has good comprehensive mechanical properties and wear resistance, and can bear large loads and impacts.。